contact us

LOFOME MACHINERY CO.,LTD.

We provide customers with quality products and provide high-quality services

看不清,请点击我!

If you would like to leave us a comment please go to

Contact Us

Air Systems SLIP-ON FLANGE : T-35

source: dssf; Time: 04/13/2017

  • C Cleat

  • S Cleat

Air Systems Details of C &S

C- Cleat .
1. This is used on smaller side of the duct.
2. Its length is 50mm larger as compared the duct side.
3. This additional 50mm( means 25mm on each side is overlapped on S- Cleat)
4. The cleat is slide on the bent edges of two ducts.

Details of C &S

S- Cleat .
1. This is used on smaller side of the duct.
2. Its length is 50mm larger as compared the duct side.
3. This additional 50mm( means 25mm on each side is overlapped on S- Cleat)
4. The cleat is slide on the bent edges of two ducts.

Air Systems Details of C &S

1. The Straight edges of (larger side) ducts are inserted in parallel pockets of S- cleats.
2. The process is repeated for the other larger side of the ducts..
3. Opened Mouth of the C-Cleat is inserted over the bent edges of ( Smaller Side ) of ducts.
4. The Sides of C- Cleats is overlapped on S – Cleat at all the 4 corners.

How long is the lead time?

TDF flange machine is integrated. With high speed, convenient operation and low air leakage ratio, it enjoys high population among customers. It saves material and labor cost, no welding is required.